INSTALLATION INSTRUCTIONS
SeaBat 8160
Operator‟s Manual
Page 23
October 6, 2011
Version 5
7. While listening to the clicks, slowly decrease the range setting one step at
a time. The click rate should increase as the range scale decreases.
8. As soon as the test is complete, turn the Transmit Power (TxPower) to the
OFF setting, so as to avoid damage to the transmit array Ceramics.
NOTE
In a noisy environment, it may be difficult to hear the transmission, which
should be a series of clicks at an approximate rate of 4Hz on the 100m range.
