INTERFACE SPECIFICATIONS
SeaBat 8160
Operator‟s Manual
Page 66
October 6, 2011
Version 5
C.3.1.26 Network
This message sets the different network addresses used and the UDP Port.
Syntax:
*NADR,N,PARAM<CR><LF>
Parameters:
N = 0:
Local IP address (processor box).
PARAM =
IP address (XXX.XXX.XXX.XXX)
N = 1:
Remote IP address (data collection system).
PARAM =
IP address (XXX.XXX.XXX.XXX)
N = 2:
UDP port.
PARAM =
UDP Port (XXXXX)
N = 3:
Gateway IP address (router).
PARAM =
IP address (XXX.XXX.XXX.XXX)
N = 4:
Subnet mask.
PARAM =
Subnet mask (XXX.XXX.XXX.XXX)
Example:
*NADR,1,10.0.1.245<CR><LF>
This example sets the 81-P processor IP address to 10.0.1.245.
C.3.1.27 Power
This message sets the sonar transmitter power.
Syntax:
*POWR,N<CR><LF>
Parameters:
N = The power value.
Example:
*POWR,0<CR><LF>
This message sets the power to OFF.
