INTERFACE SPECIFICATIONS
SeaBat 8160
Operator‟s Manual
Page 69
October 6, 2011
Version 5
C.3.1.33 Raw Output Beam Selection (raw output only)
This message sets the first exported beam.
Syntax:
*RAWB,N<CR><LF>
Parameters:
N = First exported beam
Valid entries are 0 to one less than the maximum number of
beams. (If beam count = 101, valid entries are 0 to 100)
Example:
*RAWB,0<CR><LF>
This message sets the first exported beam to be 0 (first beam).
C.3.1.34 Raw Output Mode Selection (raw output only)
This message sets the raw output mode.
Syntax:
*RAWM,N<CR><LF>
Parameters:
N = 0: No data exported.
N = 1: 16 bits magnitude, 20 beams exported.
N = 2: 16 bits magnitude and 16 bits phase, 10 beam exported.
N = 3: 8 bits magnitude, 40 beams exported.
Example:
*RAWM,1<CR><LF>
This message sets the raw output mode to 1 where 16 bit
magnitude data (20 beams) are being exported.
C.3.1.35 Reset
This message resets the sonar processor.
Syntax:
*RSET<CR><LF>
Parameters:
N/A
Example:
*RSET<CR><LF>
This message resets the sonar processor.
