Reson SeaBat 7125 SV2, Operator'S Manual

Page: 162 / 212

TROUBLESHOOTING
SeaBat 7125 SV2 Operator‟s Manual
Page 146 July 25, 2011
Version 3
Message Description Action Type
Trigger out offset (x) is invalid An unsupported value was received for
trigger setup. Check settings in user interface. External Trigger
Trigger out length (x) exceed limit of
20ms An unsupported value was received for
trigger setup. Check settings in user interface. External Trigger
UDP Configuration file not available Software installation is corrupt. Restore factory defaults. Reinstall
software. Configuration
UDP interface status: Down One or more PCI bus or network
resources have failed to initialize. Check user permissions and
transceiver network hardware. Startup
UDP Server - Unknown packet type A connected client has sent an
unrecognized command to the
software. Review client software source code or
definitions for correct implementation of
RESON 7k Data Format. Network
Components
UDP Server - Warning max connection
reached The network module has become
saturated with client connections and
will refuse any further connections. Close some of the connected clients. Network
Components
WARNING: Critical Disk Level: RDR - Data
recording stopped The hard drive is getting full. One or
more errors have occurred in
conjunction with data recording. Check user permissions and available
disk space. Check file names and
recording directories Data Recording
WARNING: PPS Time-stamp error The internal clock may not be
disciplined properly resulting in
incorrect time stamp of data. Check 1PPS connections and GPS
output. If uncorrected sonar data
cannot be time stamped to 1
millisecond System Stability
WARNING: Reduce Ping Rate or Range -
DROPPING ping The system is overloaded processing
data. A ping has been lost because the
processing queue is full. Restart the software. Reboot PC. System Stability