TROUBLESHOOTING
SeaBat 7125 SV2 Operator‟s Manual
Page 145
July 25, 2011
Version 3
Message
Description
Action
Type
RDR Record failed - Set file name failed:
<x>
The hard drive is getting full. One or
more errors have occurred in
conjunction with data recording.
Check user permissions and available
disk space. Check file names and
recording directories
Data Recording
Roll Compensation is not available.
The input data for motion is not
available or the feature is not enabled.
Check device inputs and cabling.
Input Signal
Roll Compensation is not available.
The input data for motion is not
available or the feature is not enabled.
Check device inputs and cabling.
Input Signal
Subscriber send() failed
The software was unable to send data
to a connected client.
Check network resources and user
permissions.
Data Subscription
Subscriber UDP sendto() failed
The software was unable to send data
to a connected client.
Check network resources and user
permissions.
Data Subscription
Subscribers outbound MMF buffer memory
overwrite error!
The link to the user interface running on
the transceiver has detected a non-
critical error.
Check system resources, shutdown all
non-critical software applications.
Reboot processor.
Data Subscription
Subscribers outbound MMF buffer read
error!
The link to the user interface running on
the transceiver has detected a non-
critical error.
Check system resources, shutdown all
non-critical software applications.
Reboot processor.
Data Subscription
TCP interface status: Down
One or more PCI bus or network
resources has failed to initialize.
Check user permissions and
transceiver network hardware.
Startup
TCP Server - Unknown packet type
A connected client has sent an
unrecognized command to the
software.
Review client software source code or
definitions for correct implementation of
RESON 7k Data Format.
Network
Components
TCP Server - Warning max connections
reached
The network module has become
saturated with client connections and
will refuse any further connections.
Close some of the connected clients.
Network
Components
Trigger out length (x) is invalid
An unsupported value was received for
trigger setup.
Check settings in user interface.
External Trigger
Summary of Contents for SeaBat 7125 SV2
Page 2: ...This page intentionally left blank...
Page 211: ......
