TROUBLESHOOTING
SeaBat 7125 SV2 Operator‟s Manual
Page 139
July 25, 2011
Version 3
Message
Description
Action
Alarm Type
Failed to configure 1st FPGA with <x>,
ERROR =
One or more of the processing cards
has failed to initialize or is non-
functional within the transceiver.
Reboot transceiver and try again.
PCI Card
Failed to find ADMXRC info, card_0,
ERROR =
One or more of the processing cards
has failed to initialize or is non-
functional within the transceiver.
Reboot transceiver and try again.
PCI Card
Failed to find ADMXRC info, card_1,
ERROR =
One or more of the processing cards
has failed to initialize or is non-
functional within the transceiver.
Reboot transceiver and try again.
PCI Card
Failed to get ADMXRC space info, Card_0,
ERROR =
One or more of the processing cards
has failed to initialize or is non-
functional within the transceiver.
Reboot transceiver and try again.
PCI Card
Failed to get ADMXRC space info, Card_1,
ERROR =
One or more of the processing cards
has failed to initialize or is non-
functional within the transceiver.
Reboot transceiver and try again.
PCI Card
Failed to register external trigger, ERROR =
The pulse is not being detected. Time
stamping will be done using system
time only. 1 millisecond accuracy not
possible.
Check input signal cabling.
Input Signal
(Timing and
Triggers)
Failed to set ADMXRC clock, Card_0,
ERROR =
One or more of the processing cards
has failed to initialize or is non-
functional within the transceiver.
Reboot transceiver and try again.
PCI Card
Failed to set ADMXRC clock, Card_1,
ERROR =
One or more of the processing cards
has failed to initialize or is non-
functional within the transceiver.
Reboot transceiver and try again.
PCI Card
Failed to set up DMA Card 0
The software could not access the
processing card device.
Check ADMXRC drivers.
General System
Startup
Summary of Contents for SeaBat 7125 SV2
Page 2: ...This page intentionally left blank...
Page 211: ......