Reson SeaBat 7125 SV2, Operator'S Manual

Page: 39 / 212

SYSTEM CONFIGURATION
SeaBat 7125 SV2 Operator‟s Manual
Page 23 July 25, 2011
Version 3
4.2.2.3 Delete a Broadcast
To delete an existing broadcast, select the broadcast you wish to delete in the UDP
Broadcasting dialog and click the Delete button. A pop-up window will appear, asking
you to confirm that you wish to delete the selected record. Click Yes to continue.
4.2.2.4 Start or Stop the Broadcast Process
To start a broadcast or stop an active broadcast, select the broadcast configuration from
the UDP Broadcasting dialog list. The command button will indicate either Start for idle
broadcast configurations or Stop for active configurations. Click the command
(Start/Stop) button. The status indicates Active if the system is broadcasting messages
to that address, or Idle if the system is not broadcasting messages to that address.
Active broadcast configurations are saved by the 7k Center software when it is stopped.
On startup, these broadcasts are resumed. Active broadcasts may also be viewed in the
Remote Connections list on the 7kCenter BITE tab (see
section 5.6.2.5 7kCenter Tab ).