INSTALLATION INSTRUCTIONS
SeaBat 7125 SV2 Operator‟s Manual
Page 152
July 25, 2011
Version 3
The transceiver offers a flexible platform for a number of functions:
Receives digitized sonar data from the receiver unit.
Receives operational settings directly through the user interface or remotely
from an external system.
Provides beamforming and initial processing of acoustical data.
Controls, formats, and generates data to external systems. This can include
making beamformed data and preprocessed image data available to external
systems over a fast Ethernet connection.
Performs built-in test routines and alerts the operator to any abnormal
conditions.
Provides an interface for a sound velocity sensor, so that range
measurements and receiver beamforming can be conducted correctly.
Provides an interface for a PPS timing interface so that accurate time
stamping of data can be made.
Displays the sonar image and the detected seabed as well as the sonar
control user interface.
Generates the various data telegrams to be recorded by Data Acquisition
Systems.
Supports optional beam data storage on a large, external RAID array.
CAUTION
The transceiver is designed and assembled specifically to
accommodate the RESON-provided software packages installed
at the factory. Installing additional software on this machine can
result in decreased performance and/or system malfunction.
Installation of additional software on the transceiver is done at
the customer‟s own risk. In the event that software is installed on
the transceiver by a non-RESON authorized technician, RESON
accepts no responsibility for any consequences that may arise in
connection with the installation.
After the transceiver is installed, the only interaction required should be to press the
power switch and energize the system.
Summary of Contents for SeaBat 7125 SV2
Page 2: ...This page intentionally left blank...
Page 211: ......
