Reson SeaBat 7125 SV2, Operator'S Manual

Page: 99 / 212

SYSTEM OPERATION
SeaBat 7125 SV2 Operator‟s Manual
Page 83 July 25, 2011
Version 3
o
Frame: Hide the units of measure, leaving only the frame around the
sonar image.
o
None: Hide all frames.
o
Beam Select: Hide the frame around the sonar image and the units of
measure. Show the frame around the selected beam.
Selected Beam: View the number of the currently selected beam in this field,
or change the beam selection by either entering a beam number or clicking
the arrow buttons to cycle through the beams.
Synchronize Settings for All Frequencies: Select to synchronize display
settings when changing frequency.
5.7.5 Data Recording
The Data Recording tab is divided into three general sections:
Recording Control
Advanced
Recording Status
Figure 24: Sample of Data Recording Tab
5.7.5.1 Recording Control
The Recording Control section of the Data Recording tab allows you to start and stop the
data recording process. Click the Record button to start recording and the Stop button to
stop recording.
5.7.5.2 Advanced (Set Filters)
Click the Set Filters button to select particular records from the Data Recording Setup
dialog to be included in the recorded data.
A minimal mandatory set is already selected and cannot be removed.
Select one or more of the predefined sets of records:
o
The Troubleshooting set includes the Sensor Data and Water column
sets.
o
The Water column set includes the Sensor Data set.