Reson SeaBat 7125 SV2, Operator'S Manual

Page: 67 / 212

SYSTEM CONFIGURATION
SeaBat 7125 SV2 Operator‟s Manual
Page 51 July 25, 2011
Version 3
11. In the Local Area Connection Properties window, double-click the Internet
Protocol (TCP/IP) selection.
12. The Internet Protocol (TCP/IP) Properties window appears. By default, the
transceiver automatically obtains an IP address. Click OK or set up your own
parameters.
4.7.2 Verifying or Changing the Computer Name and/or Workgroup Name
NOTE
If changing the Computer Name, a restart of the transceiver is required before the new
name takes effect.
The default workgroup name for the transceiver is
Workgroup and can be found on the
network workgroups. Use the following steps to verify or change the computer name
and/or workgroup name.