TROUBLESHOOTING
SeaBat 7125 SV2 Operator‟s Manual
Page 142
July 25, 2011
Version 3
A.6 Warning Messages
– Master List in Alphabetical Order
Message
Description
Action
Type
***** (xxx) Dropping out-of-order ping #<x>
The data processing chain has been
delayed and stale data has been
discarded.
Check transceiver hardware and
resources.
Data Processing
7K Bite File cannot be Read
Software installation is corrupt.
Restore factory defaults. Reinstall
software.
Configuration
Cannot Open or Create UDP Configuration
file
Software installation is corrupt.
Restore factory defaults. Reinstall
software.
Configuration
Cannot Read UDP Configuration file <x>
Error
Software installation is corrupt.
Restore factory defaults. Reinstall
software.
Configuration
Disk Level Threshold: X%.
The hard drive is getting full. One or
more errors have occurred in
conjunction with data recording.
Check user permissions and available
disk space. Check file names and
recording directories
Data Recording
DMA Transfer Timeout. <x> of <x> bytes
received
One or more pings have been lost due
to an error on the uplink between the
receiver and the software. The system
is becoming unstable and data transfer
is corrupted on the PCI bus.
Reboot. Check transceiver hardware.
Data Processing
ERROR : NSD
An error has occurred in reading of
BITE data. The data buffer has
overflowed.
No action needed.
BITE Data
Failed to start PCI Copier thread
One or more PCI bus or network
resources have failed to initialize.
Check user permissions and
transceiver network hardware.
Startup
Failed to start PCI Reader thread
One or more PCI bus or network
resources have failed to initialize.
Check user permissions and
transceiver network hardware.
Startup
Summary of Contents for SeaBat 7125 SV2
Page 2: ...This page intentionally left blank...
Page 211: ......