NautoPilot® 5000 Series
102-890.NG001-NG003
Operator Manual
10000001052
60
Edition: 003
This display in Figure 28 shows numerical and graphical recorded information on:
- Actual heading
- Set heading
or Set COG
or Track Course
(depends on selected control mode)
- Rudder position angle
- Current operating mode at the Autopilot which is still active.
Table 6
Softkeys for HDG/Rudder Plot Display
Function
Figure 28/1
Touch- icon, displays a legend for the recorded information.
Figure 28/2
Axis for recorded rudder angle [deg].
Figure 28/3
The rudder position angle is displayed as a magenta colored
graph.
Figure 28/4
Time axis for records [min].
Figure 28/5
Touch- icon, toggles resolution for the time axis 5 min / 20 min.
Figure 28/6
Axis for recorded current heading.
Figure 28/7
Touch- icon, toggles resolution for the heading axis
+/- 20 deg / +/- 60 deg.
Figure 28/8
The actual heading is displayed as a blue graph.
Figure 28/9
Information regarding heading source and actual heading value.
Figure 28/10 Set heading value.
For Course Control this display is designated as Presel. COG
(Preselected Course Over Ground) after turning the rotary knob,
Set COG after releasing the knob.
For Track Control this display is designated as Track Course. For
Heading Control this display is designated as Set Heading.
Figure 28/11 Touch- icon, toggles resolution for the set heading value.
Figure 28/12 Set Heading is displayed by an orange dotted line.
Figure 28/13 Rudder angle value with an arrow indicating
the rudder direction.
Figure 28/14 Softkey, switches to the Actual Parameter display.
Figure 28/15 Softkey, switches to the main (initial) display.
Figure 28/16 Touch- icon, toggles resolution for the rudder angle axis
+/- 8 deg / +/- 16 deg.
