NautoPilot® 5000 Series
102-890.NG001-NG003
Operator Manual
Edition: 003
95
10000001052
Table 15
Meanings of Parameter Memory
Function
Figure 57/1
Actual values of the parameters yawing, rudder and counter
rudder. These values must not be identical to one of the below
parameters sets.
A selected parameter set (parameter set M1 is selected as
shown) can be changed with the Parameter softkey at the
initial display - this changed parameter values are displayed as
Actual.
Figure 57/2
Parameter set M1, this parameter set is selected via the check
box.
If a parameter set is selected, Parameter Set x will be dis-
played in the upper right corner of the display.
Figure 57/3
to
Figure 57/6
Parameter sets M2 to M5 (not selected - only one parameter
set can be selected).
Figure 57/7
Softkey for switching back to the previous display without a
modification/change of a parameter set.
Figure 57/8
Softkey for modifying the selected parameter set (not for
activating this parameter set).
To change a parameter set, press the appropriate softkey for the parameter set you
wish to change.
A small icon appears prompting the operator to press the SET button for a
parameter set change.
