NautoPilot® 5000 Series
102-890.NG001-NG003
Operator Manual
Edition: 003
49
10000001052
Figure 20/5
DIM button
Adjusts brightness of illumination and display.
See also section 6.3 for dimming
active/inactive NautoPilot® Operator Units.
Figure 20/6
ACK button with
LED (red)
Acknowledges alarm or status messages.
LED (red blinking) indicates the first
occurrence of an alarm or status message
(blinking) or that an acknowledged alarm or
status message is still present (constant
glow).
In order to avoid unintended
acknowledgement of a new incoming alert,
the push button is deactivated for 1 second
after receiving a new alert.
Figure 20/7
SET button with
LED (yellow)
Sets changed parameters or adjusted values.
LED blinks to request the pressing of this
button.
Figure 20/5
and 7
DIM and SET
buttons
Activates the Test function if both buttons are
pressed simultaneously.
An interactive test (for the operator of the
NautoPilot® Operator Unit) is performed to
check the operating elements and the touch-
screen and its function.
Figure 20/8
Combined rotary
knob/button
Presets a heading and activates adjusted set
heading value.
Information about the changeover of NautoPilot® Operator Units, see section
6.3. Information on the test function, see section 2.3.7
Information on the alarm/status message handling, see section 7.
