NautoPilot® 5000 Series
102-890.NG001-NG003
Operator Manual
10000001052
34
Edition: 003
Procedure of the Track Change Maneuver
Indications
Comment/Notes
An alert is displayed at the top bar of the display (see section 7).
Track
WOP IN x MIN OR LESS
x minutes before the WOP.
The approach time is transmitted from
the ECDIS to the Autopilot.
The LED ACK flashes.
At the top bar of the display the message
is displayed in long text.
2 pulses
WOP IN x MIN
After acknowledgement the LED is alight
constant and the message text changes
to short text.
Please note: If this warning is not acknowledged it becomes an Alarm. With 3 pulses acoustical sound,
red and blinking message bar and the below mentioned message about the 30 seconds- warning is
dropped.
An alert is displayed at the top bar of the display (see section 7).
WOP IN 30 SECOND OR LESS
30 seconds before the track change
maneuver is started.
2 pulses
WOP IN 30 SECOND
After acknowledgement the LED is alight
constant and the message text changes
to short text.
Track change maneuver starting. An alert is displayed at the to bar of the display (see section 7).
Changing Track xxx
During the track change maneuver, the
LED ACK is alight constant.
Changing Track xxx
Approach maneuver to a new track
ended. An alert is displayed at the top
bar of the display.
Chang. Track xxx
As soon as the ship reaches the new
track this message must be
acknowledged.
