NautoPilot® 5000 Series
102-890.NG001-NG003
Operator Manual
10000001052
44
Edition: 003
difference of the track courses is >135
.
Indications
Comment/Notes
An alert is displayed at the top bar of the display (see section 7).
Track Control Interrupted
Distance TO/NEXT- Waypoint too short
or
Change Angle too big
Track
Heading
Control
Control
2 pulses
Both messages swapping.
2 acoustical pulses.
The operating mode changes from
Track Control to Heading Control.
Acknowledge the alert.
Track
Heading
Control
Control
The operating mode changes from
Track Control to Heading Control.
The track course becomes set course
(preset heading). As opposed to
manual change- over from Track
Control to Heading Control, the
setting of
the maneuver parameters might
maintain as under Track Control.
I. e.:
On straight leg:
- All values will be adopted from
Heading Control mode.
On curved path:
- The radius planned for the next
track change maneuver is
maintained.
- The rudder limit remains at Max.
- Alert Check Settings is displayed
(see section 1.4.5.1.7.2).
If during automatic change- over from
Track Control to Heading Control - the
ship is in a track change maneuver, the
track course of the next track section is
taken as the new set course (preset
heading). The radius planned for the
current track change maneuver is taken
as maneuver parameter.
