NautoPilot® 5000 Series
102-890.NG001-NG003
Operator Manual
10000001052
36
Edition: 003
1.4.5.1.4
Interruption of Track Control
Interruption of Track Control is possible as follows:
- Change- over of the operating mode of Track Control to Heading Control on the
operator unit of the Autopilot.
- Change- over of the operating mode of Track Control to manual control by
switching over the operating mode on the steering mode selector.
- Activating the override tiller
- If the Track Control fails, it is automatically changed to Heading Control.
For more details in this case, refer to section 1.4.5.1.7.2.
Re- approaching the track is the same procedure as starting a new track !
1.4.5.1.5
Changing TO- WPT and NEXT- WPT without Interrupting Track Control
NEXT- WPT (old
Figure 18: Changing TO- WPT and NEXT- WPT without Interrupting Track Control
NEXT- WPT (new)
The Autopilot permits changing TO- WPT and NEXT- WPT without interrupting
track control, if the track planning system (ECDIS) already supports this feature.
Consult your ECDIS manuals for further operating instructions on how to change
the waypoints of the active route.
TO- WPT (new)
Obstacle
TO- WPT (old)
