C
HAPTER
4
26
Raven RS1™ and RS Lite™ Calibration and Operation Manual
Response Speed.
The Response Speed determines how quickly the machine will steer when prompted. If the
Response Speed is too high, the wheel movement may become jittery. If the Response Speed is too low, the
wheel movement may wander lazily. Values range between 1 - 255.
NOTE:
If steering becomes jittery, lower the Response Speed value in increments of 10. If steering does not
become jittery, the Response Speed value may be increased in increments of 10 until the desired
Response Speed is reached.
Last Pass Sensitivity (Non-Tractor Tunesets).
The Last Pass Sensitivity determines how tightly the machine tries
to steer on a curved path. If the setting is too high, the machine will steer to the inside of a curve. If the setting
is too low, the machine will steer to the outside of a curve. The Last Pass Sensitivity value ranges from 1 - 500.
NOTE:
The Last Pass Sensitivity value only adjusts the system performance on Last Pass and A-B Curve lines.
Adjusting the Last Pass Sensitivity value will not affect pivot performance. To adjust pivot
performance, adjust the Response Speed and Sensitivity values.
Summary of Contents for RS Lite
