![background image](http://html1.mh-extra.com/html/rands/nrx-b4/nrx-b4_user-manual_3240273326.webp)
Remote Control Commands
R&S
®
NRX
326
User Manual 1178.5566.02 ─ 05
14.6.8
For NRT Measurement Type
...............................................................................................326
....................................................................................... 329
................................................................................................331
14.6.8.1
NRT Mode Settings
Further information:
●
Chapter 9.5.1, "NRT Mode Settings"
CALCulate<Measurement>[:CHANnel<Channel>]:NRT:BURSt:MODE
................................ 326
CALCulate<Measurement>[:CHANnel<Channel>]:NRT:BURSt:PERiod
............................... 327
CALCulate<Measurement>[:CHANnel<Channel>]:NRT:BURSt:WIDTh
................................ 327
CALCulate<Measurement>[:CHANnel<Channel>]:NRT:CCDF:THReshold
...........................327
CALCulate<Measurement>[:CHANnel<Channel>]:NRT:DIRection
.......................................328
CALCulate<Measurement>[:CHANnel<Channel>]:NRT:PEP:HOLD:TIME
............................328
CALCulate<Measurement>[:CHANnel<Channel>]:NRT:BURSt:MODE
<mode>
Defines how the average burst power is determined.
Suffix:
<Measurement>
.
1 to 4
Measurement channel
<Channel>
1 to 2
1 = primary sensor, 2 = secondary sensor or 1 = forward, 2 =
reflection (reverse)
Parameters:
<mode>
AUTO | USER
AUTO
The power sensor automatically recognizes the duty cycle of the
burst series and calculates the average burst power from this
duty cycle and the average power. Set an appropriate video
bandwidth using
CHANnel<Channel>]:NRT:VBWidth[:VALue]
USER
Define the duty cycle by:
The R&S NRX calculates the average burst power from these
values.
*RST:
AUTO
Manual operation:
See
Configuring Sensors