Measurement Types and Result Displays
R&S
®
NRX
86
User Manual 1178.5566.02 ─ 05
resolution is determined by the sampling rate of the power sensor. An external trigger
signal or internal signal triggering is required for synchronization.
Trigger level
Power Trigger event
Timeslot 1
Timeslot 2
Timeslot 3
Timeslot width
Exclude from start
Exclude from end
Start of fence
Length of fence
Time
Figure 8-6: Timeslot measurement parameters
Adopt the timeslot width to the test signal. You can restrict the measurement to the rel-
evant part of a timeslot by excluding intervals at the start and the end of the timeslot.
Also, you can define an exclusion interval, a so-called fence, within the timeslot.
...........................................................................................86
................................................................................. 89
8.6.1
Timeslot Result Display
You can choose between a scalar or graphical result display.
To change the display format
1. Select the timeslot measurement type:
"Measurement Settings"
> "Measurement Type"
> "Timeslot"
2. Select the display format:
"Display"
> "Display Format"
Timeslot
