![background image](http://html1.mh-extra.com/html/rands/nrx-b4/nrx-b4_user-manual_3240273340.webp)
Remote Control Commands
R&S
®
NRX
340
User Manual 1178.5566.02 ─ 05
OUTPut:RECorder<output>:LIMit:LOWer:RATio[:VALue]
<value>
Enter the power ratio measurement value that corresponds to the output voltage of 0
V.
Below this limit, the analog output is set to 0
V.
If you enter a value without unit, the unit is defined by
. For further information, see
Suffix:
<output>
.
1 to 2
BNC connectors at the rear; 1
=
Out
1
/
Trig
Out,
2
=
Trig
In
/
Out
2
Parameters:
<value>
Range:
-180.0 to +180.0
*RST:
+0.0
Default unit: dB
Manual operation:
See
OUTPut:RECorder<output>:LIMit:UPPer:CCDF
<value>
Enter the CCDF measurement value that corresponds to the output voltage of 2.5
V.
Above this limit, the output is set to 2.5
V.
Suffix:
<output>
.
1 to 2
BNC connectors at the rear; 1
=
Out
1
/
Trig
Out,
2
=
Trig
In
/
Out
2
Parameters:
<value>
Range:
0.0 to 100.0
*RST:
1.0
Default unit: pct
Manual operation:
See
OUTPut:RECorder<output>:LIMit:UPPer[:VALue]
<value>
Enter the measurement value that corresponds to the output voltage of 2.5
V. Above
this limit, the output is set to 2.5
V.
If you enter a value without unit, the unit is defined by
. For further information, see
Suffix:
<output>
.
1 to 2
BNC connectors at the rear; 1
=
Out
1
/
Trig
Out,
2
=
Trig
In
/
Out
2
Parameters:
<value>
Manual operation:
See
Configuring the Analog Signal Ouput and the Trigger Output