Remote Control Commands
R&S
®
NRX
216
User Manual 1178.5566.02 ─ 05
The power sensor averages every measured value using a series of samples. If a
RANDom
feed is selected, the power sensor takes a random value from the samples
and forwards it to the R&S NRX as a measured value.
PEAK
is the maximum of all
samples in the measurement interval.
Suffix:
<Measurement>
.
1 to 4
Measurement channel
<Channel>
1 to 2
1 = primary sensor, 2 = secondary sensor or 1 = forward, 2 =
reflection (reverse)
<Channel>
1 to 2
1 for R&S NRX
2 is allowed for R&S NRP2 compatibility, but only if the first
channel suffix is set to 1.
Parameters:
"<string>"
POWer:AVERage | POWer:PEAK | POWer:RANDom
Available for continuous average, burst average, trace, pulse
analysis, time gate, timeslot measurements.
"<string>"
POWer:TRACe | POWer:PEAK:TRACe |
POWer:RANDom:TRACe |
POWer:AVERage ON SWEep<1 to 4> |
POWer:PTAVerage ON SWEep<1 to 4> |
POWer:PEAK ON SWEep<1 to 4>
Available for trace measurements. The suffix <1 to 4> selects
the time gate.
"<string>"
CCDF:TRACe | CDF:TRACe | PDF:TRACe
Available for statistics measurements.
"<string>"
POWer:FORWard:AVERage | POWer:FORWard:CCDFunction |
POWer:FORWard:PEP | POWer:ABSorption:AVERage |
POWer:CFACtor | POWer:ABSorption:PEP |
POWer:FORWard:AVERage:BURSt |
POWer:ABSorption:AVERage:BURSt
Available for NRT measurements, forward direction.
"<string>"
POWer:OFF | POWer:REVerse | POWer:SWRatio |
POWer:RLOSs | POWer:RCOefficient | POWer:RFRatio
Available for NRT measurements, reverse direction.
*RST:
POWer:AVERage
Measurement Settings and Results