Operating Concepts
R&S
®
NRX
40
User Manual 1178.5566.02 ─ 05
5.3.1
Switching to Remote Control (REMOTE)
Prerequisites
●
A link is established between the controller and the R&S NRX.
●
The R&S NRX is configured correctly.
After power-up, the R&S NRX is always in manual control mode, "LOCAL". When the
R&S NRX receives a SCPI command, it switches to remote control irrespective of the
selected interface.
5.3.2
Returning to Manual Operation (LOCAL)
If the R&S NRX is in remote control, you can display settings using the front-panel
keys and the touchscreen, but you cannot change settings. To do that, you have to
return to manual operation.
The R&S NRX remains in remote control until you perform one of the following actions.
Make sure that the R&S NRX is free for you to use.
► Press the [Esc/Local] key. See
If the manual operation was disabled by the
&LLO
command (local lockout) and the
[Esc/Local] key does not work, switch the R&S NRX off and on again.
► Send the
>L
command (go to local).
► Tap the symbol on the touchscreen.
Chapter 5.1.3, "Status Information"
Remote Control
