![background image](http://html2.mh-extra.com/html/racal-instruments/2461/2461_user-manual_3134747193.webp)
User Manual 2461 Type C
B-4
INPUT1:ROUT SEP
Attempt to change to separate inputs
INPUT1:COMP:LEVEL
Attempt to set a trigger level
INPUT1:ATTEN
Attempt to change the attenuator
The default settings for Negative Pulse Width function, in addition to the above common
settings, are:
Command
Measurement Function
CONF:TINT
Time Interval 1-2
INPUT1:COMP:SLOPE NEG
Negative Slope, INPUT 1
INPUT2:COMP:SLOPE POS
Positive Slope, INPUT 2
The following commands, when sent to the 2461 Type C while Negative Width is enabled
will generate errors:
Command
Measurement Function
INPUT1:COMP:SLOPE POS
Attempt to change slope on INPUT 1.
INPUT2:COMP:SLOPE NEG
Attempt to change slope on INPUT 2.
INPUT1:COMP:SETUP:AUTO OFF/ONCE Attempt to change Auto trigger state on 1/P1
INPUT1/2:COMP:LEVEL
Attempt to set a trigger level
INPUT1:ATTEN
Attempt to change the attenuator
INPUT1:ROUT SEP
Attempt to change to separate inputs
Rise/Fall Time
In addition to the above common settings, the default settings when the Rise Time function
is selected are:
Command
Measurement Function
CONF1:TINT
Time Interval 1-2
INPUT1:COMP:SLOPE POS
Positive Slope, INPUT 1
INPUT2:COMP:SLOPE POS
Positive Slope, INPUT 2
The following commands, when sent to the 2461 Type C while Rise Time is enabled, will
generate errors:
Command
Measurement Function
INPUT1:COMP:SLOPE NEG
Attempt to change slope on INPUT 1
INPUT2:COMP:SLOPE NEG
Attempt to change slope on INPUT 2
INPUT1:COMP:SETUP:AUTO OFF/ONCE Attempt to change Auto trigger state on
INPUT1
INPUT1:COMP:LEVEL
Attempt to set a trigger level on INPUT 1 & 2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com