2461Type C User Manual
Using The VXI
plug&play
Install Disks 5-6
Racal Instruments
1998
“TTLTRG4”
“TTLTRG5”
“TTLTRG6”
“TTLTRG7”
“Off”
Configure Inputs
For each 2461 Type C function card, the following parameters
can be set:
Figure 5-3, Configure Input secondary panel
•
The
Coupling
control sets the input coupling (AC or DC).
•
The
Impedance
control sets the terminating impedance
(50
Ω
or 1M
Ω
).
•
The
Attenuation
control sets the input block signal
attenuator (x1 or x10).
•
The
Filter
control enables or disables the input low-pass
filter.
•
The
Trigger Mode
control selects either Auto Trigger or
Manual Trigger.
•
The
Slope
control sets the trigger slope, which can be either
positive or negative.
•
The
Hysteresis
control selects the input hysteresis voltage
(high or low).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com