QVI Cobra DRS-300, User Manual

Page: 71 / 100

5. Carefully swing the video camera to the right (or left) to reveal the lower
sensor mounting screw. Then use a 3 mm hex key (Allen) wrench to remove
the screw. See Figure 4-2.
6. Hold the camera assembly, mounting plate, and sensor as you remove the
other two sensor mounting screws (see Figure 4-3). Use a 3 mm hex key
(Allen) wrench.
4-4 Swapping Sensors
Figure 4-3. Removing the Upper Two Mounting Screws
Figure 4-2. Removing the Lower Mounting Screw