QVI Cobra DRS-300, User Manual

Page: 37 / 100

4. Remove all the boxes, except the Cobra 3D shipping carton, from the pallet
and set them aside.
-
The Cobra 3D shipping carton is the largest box on the pallet and is
bound by plastic bands (see Figure 2-16).
Note: Figure 2-16 illustrates the typical packing arrangement for international
orders. For orders shipped within North America, the boxes are usually stacked
on top of each other and shipped on a smaller pallet.
The plastic bands that bind the Cobra 3D shipping carton are under
considerable tension and may recoil unpredictably when cut.
5. Use a pair of diagonal cutters to cut and remove the two plastic bands that
bind the Cobra shipping carton (see Figure 2-16).
6. Remove the top cap from the shipping carton (see Figure 2-16).
7. Remove the top insert and shipping foam from inside the shipping carton.
8. Lift the carton sleeve straight up to remove it from inside the bottom cap
(see Figure 2-16).
2-16 Installation and Setup
Figure 2-16. Unpacking Cobra 3D