QVI Cobra DRS-300, User Manual

Page: 38 / 100

9. Verify that both lifting straps are securely wrapped around the granite base.
Then align the ends (loops) of the lifting straps and place them over the
hook of a power or manual hoist, as shown in Figure 2-17.
To avoid personal injury, lift the system with a power or manual hoist. If a
power or manual hoist is unavailable, use at least two people capable of
lifting at least 80 kg (175 lbs) to lift the system manually. Have each person
firmly grasp the granite base and lift straight up. When lifting, flex your
knees, not your back, to avoid back injury. Avoid pinching your fingers
between the granite and work bench when lowering Cobra.
Do not attempt to lift Cobra by the handle on the main unit. This could seriously
damage the unit.
10. Position two people next to Cobra — one on either side. Then slowly lift
Cobra with the hoist and place it on a sturdy bench capable of bearing its
weight.
11. Remove the lifting straps and plastic wrapped around the Cobra main unit.
Note: Do not discard the lifting straps. You will need them to relocate Cobra
3D after initial installation.
Installation and Setup 2-17
Installation
and
Setup
Figure 2-17. Lifting Cobra 3D