Computer Requirements
Scan-X software is compatible with Windows™ 98 Second Edition and
Windows 2000. If your purchased the Factory-supplied Computer option, do not
make any configuration changes to the computer or load any software prior to
consulting your authorized sales representative first; the system configuration
has been optimized for use with Cobra.
If you are supplying your own computer it will need to be configured (described
later), and must meet the following minimum requirements:
•
Pentium III, 500 Mhz processor
•
CD-ROM drive
•
VGA Card capable of 1024 x 768, 32 BIT color
•
Monitor capable of handling 1024 x 768 resolution
•
Windows 98 Second Edition or Windows 2000 operating system
•
256 MB RAM (Windows 98); 512 MB RAM (Windows 2000)
•
Bi-directional, 1284 compliant parallel port
•
Software: DirectX 8.1 or higher; Internet Explorer 6.0 or higher
1-8
Introduction
Summary of Contents for Cobra DRS-300
