QVI Cobra DRS-300, User Manual

Page: 31 / 100

10. Reinstall the camera
cover (using the screws
removed in Step 2).
11. Screw the LCD screen
assembly onto the Cobra
handle. Use a 5/32" hex
key (Allen) wrench to
tighten the mounting
screw (see Figure 2-9).
12. Follow the procedure
described next to make
the necessary cable
connections.
Cable Connections
After mounting the camera and LCD screen assemblies, follow the steps below
to make the necessary cable connections.
1. Locate the Camera and LED Power cable, and then connect
J2008
to the
LED CTRL port on the Cobra back panel (see Figure 2-10). Use a small
flat-head screwdriver to tighten the two screw-locks (one on each side of the
connector) firmly.
2-10 Installation and Setup
Figure 2-9. Installing the LCD Screen Assembly
Figure 2-10. Connecting J2008 to the Back Panel