QVI Cobra DRS-300, User Manual, Page: 30 / 100

8. Use a 3 mm hex key (Allen) wrench and the two screws removed in Step 3
to resecure the camera to the camera mounting plate (see Figure 2-).
9. Insert the other two partially-threaded screws into the upper two screw
holes in the camera mounting plate and sensor. Then use a 3 mm hex key
(Allen) wrench to tighten the screws firmly (see Figure 2-8).
Installation and Setup 2-9
Installation
and
Setup
Figure 2-7. Securing the Camera to the Mounting Plate
Figure 2-8. Tightening the Upper Two Screws