QubicaAMF Edge String, Owner'S Manual

Page: 50 / 210

Owner’s Manual
400-051-202-01 Rev. B Page 2-18
SCORING Only with QubicaAMF Devices:
288-250-025-02 - 5HD-HUB-02
(or equivalent).
This is a serial port that interfaces with the 5HD-HUB-
02 to communicate with the Front Desk (the main
center’s PC where the QubicaAMF b owling
management program is installed).
Essentially it takes orders for example to open a lane
for a game, and gives all machine status information.
MCU IN Only with QubicaAMF Devices:
290-002-105 - MCU (or
equivalent).
This is a serial port that is either connected to
QubicaAMF’s USB -RS486 adapter (MCU) that is
connected to a PC or to another EDGE String System
Controller MCU Out port. Pinspotter functions are
controlled through this port.
MCU OUT Only with QubicaAMF Devices:
290-002-105 - MCU (or
equivalent).
This is a serial port that can be connected in cascade
configuration to the next EDGE String System
Controller MCU IN port.
AUX SERIAL Only with QubicaAMF Devices This is a serial port that is normally not used, but is
provided to give some custom functions when
required.
DMX 1 IN/OUT With QubicaAMF Devices:
275-002-032
– EFFECTS SERVER
X) or equivalent)
With Customer’s Devices:
Compatible only with devices
that use the DMX
communication.
This is a DMX port that can be connected with
Qub
icaAMF’s EFFECT S SERVER X or any customers
DMX device port.
DMX 2 IN/OUT With QubicaAMF Devices:
275-002-032
– EFFECTS SERVER
X) or equivalent)
With Customer’s Devices:
Compatible only with devices
that use the DMX
communication.
This is a DMX port that can be connected with
QubicaAMF’s EFFECT S SERVER X or any customers
DMX device port.
Daisy Chain CAT5 cable from/to System Controller.
Last System Controller needs terminator (p/n
TOOTCS120TER).
CH1 DECK LIGHTS
OUTPUT Only with QubicaAMF Devices:
275-002-001-01 ODD CP DECK
LIGHT FIXTURE (or equivalent).
This port supplies power and drives the QubicaAMF CP
DECK LIGHT FIXTURE, which is basically an RGBW LED
Lamp.
CH2 DECK LIGHTS
OUTPUT Only with QubicaAMF Devices:
275-002-001-01 EVEN CP DECK
LIGHT FIXTURE (or equivalent).
This port supplies power and drives the QubicaAMF CP
DECK LIGHT FIXTURE, which is basically an RGBW LED
Lamp.
E-STOP Only with QubicaAMF Devices This port can be connected to a QubicaAMF plug, that
serves like a security key, or to a QubicaAMF E-STOP
Device. If nothing is connected, the system goes into
E-
STOP error mode, which won’t allow the machine to
turn on or the motors to run.