QubicaAMF Edge String, Owner'S Manual

Page: 52 / 210

Owner’s Manual
400-051-202-01 Rev. B Page 2-20
2.3.5. Keypad
The keypad is used to enter and view settings, check machine status, change operating
modes, clear error messages, and perform machine functions. Keypad layout and
pushbutton functions are explained below.
As shown in Figure 2-49, pushbuttons on the upper portion of the keypad are used for
general machine control and keypad navigation. They are not specific to a lane.
Pushbuttons on the lower portion of the keypad are split into two groups and are used to
perform various machine functions. The right group controls the Odd machine. The left
group controls the Even machine.
Figure 2-49, System Controller Keypad
Keypad Pushbuttons
Table 2-1, Keypad Pushbuttons
General Machine Control/Keypad Navigation
LANE Alternates control between Odd and Even lanes.
MENU
Press once for Settings / Functions / Counters . Press twice for
Diagnostics.
BACK Return to previous menu.
UP Scroll up.
DOWN Scroll down.
Even Machine
Controls Odd Machine
Controls
General Machine Control/
Keypad Navigation