Owner’s Manual
400-051-202-01 Rev. B
Page E-9
Precautions:
LOTO, Lane Barriers, Slip Hazard, Trip Hazard
Tools:
•
Ratchet or Impact Driver
•
3
/
8
” and ½” Sockets
•
Needle-Nose Pliers
•
Masking Tape
•
Permanent Marker
Location:
Operator Access Area (behind machine), Front of Machine
Est. Time:
60 min
Notes:
•
It is recommended to have replacement chain master links (P/N: M0690011) available.
Locking clip or master link may be damaged or lost during removal.
Procedure:
1.
Before LOTO, press
PINS UP
.
2.
Implement LOTO and deploy lane barriers.
3.
Unwind all strings from reel arm spools, untie retaining knot, and label strings using
masking tape and marker.
4.
At front of machine, reach under pinspotter front panel and unclip shield panel carabiner
from drawbar.
5.
Loosen bearing housing bolts (4) and tensioning bolts (2) to relieve drawbar chain
tension.
6.
Remove ground screws (2) and mounting bolts (4) for pinspotter front panel.
7.
Remove pinspotter front panel and set aside.
8.
Pull all strings through drawbar pulleys to remove them from drawbar.
9.
Using needle-nose pliers, remove locking clip from all chain master links (4) and remove
master link side plates.
a.
There are 2 master links for each drawbar chain.
b.
Reposition drawbar at any time if better access is required.
c.
The body of each master link will be trapped between drawbar carriage and
drawbar guide bar.
10.
Remove both chains from master links by sliding chain off master link pin.
11.
Remove drawbar by pushing one end away and pulling on other end. Drawbar will slide
off drawbar guide bars. Set aside all chain master links, locking clips, and side plates.
12.
Follow above steps in reverse order to install drawbar.
13.
Remove LOTO and lane barriers. Return machine to service.
Summary of Contents for Edge String
