QubicaAMF Edge String, Owner'S Manual

Page: 64 / 210

Owner’s Manual
400-051-202-01 Rev. B
Page 3-4
Level 1 Interventions
– Lockout/Tagout (LOTO) Not Required
•
CAUTION . Thrown balls and scattering pins can cause injury if bowling play is allowed
during an operator intervention. Operator is responsible for performing required safety
procedures. Operator may implement lane barriers if needed to protect against thrown
balls during maintenance.
•
Keep end of pin hook away from face in case a ball is thrown during intervention.
•
Do not reach into machine boundary with arms or body.
3.2.1. Clear Pin Tangle
1. Press WORK .
2. Open machine rear cover.
3. Untangle pins using pin hook.
4. Close machine rear cover.
5. Press PLAY .
3.2.2. Clear Stuck Ball on Pit Floor or Pindeck
1. Press WORK .
2. Open pit hinged top cover or machine rear cover to access stuck ball(s).
3. Move ball(s) into ball door with grip end of pin hook.
4. If any pins fell while moving ball, press RE-SPOT to re-spot them.
5. Close all open covers.
6. Press PLAY .
3.2.3. Clear Ball Jam or Stuck Ball in Double Division
1. Press WORK .
2. Open pit hinged top cover or machine rear cover to access stuck ball(s).
3. Pass grip end of pin hook through ball door to clear ball jam.
4. If ball(s) cannot be cleared, follow “Clear Stuck Ball at Chain Lift” (see Page 3-7).
5. Close all open covers.
6. Press PLAY .
3.2.4. Clean Pindeck and Pit OR Clean Lane with Lane Machine
NOTE: If entering pit for cleaning, LOTO and lane barriers are required.
1. Press PINS UP .
2. If cleaning or oiling lane, run lane machine.
3. Open machine rear cover and clean pindeck with soft mop or broom.
4. Open pit hinged top cover and clean pit floor with soft mop or broom
5. Close all open covers.
6. Press PLAY .