QubicaAMF Edge String, Owner'S Manual

Page: 90 / 210

Owner’s Manual
400-051-202-01 Rev. B
Page 4-16
25). Restart power to system controller. Replace components
as needed.
Cause 2: System controller Foul Detector setting not set correctly
Solution: Set system controller Foul Detector setting to ON to allow foul
detector activation to control scoring. Set to WARNING for
warning only (no effect on scoring). Set to OFF to deactivate
foul detector (see Page 2-21).
4.5.12. Mask Lights Not Functioning Correctly
Cause 1: Mask light unit malfunction
Solution: Check all electrical connections between mask light unit and
system controller. In the Text sub-menu of the system controller
Diagnostics menu, verify that Mask Light On status alternates
between BALL 1 and BALL 1/BALL 2 for each frame (see
Page 2-24). Restart power to system controller. Replace
components as needed.
Cause 2: System controller Mask Lights setting not set correctly
Solution: Set system controller Mask Lights parameter to AS BALL
NUMBER (see Page 2-21).
4.5.13. Pitlight Not Functioning Correctly
Cause 1: Pitlight/system controller malfunction
Solution: Restart power to system controller. Check all electrical
connections between system controller and pit light (including
ground wire). If operating with CenterPunch Effects Server,
check electrical connections to adjacent system controllers and
refer to manual 400-275-000 for proper effects server
installation/operation.
Cause 2: System controller Pit Light setting not set correctly
Solution: Set system controller Pit Light setting to WHITE for white light
only. Set to COLOR for alternative light color.