QubicaAMF Edge String, Owner'S Manual

Page: 203 / 210

Owner’s Manual
400-051-202-01 Rev. B
Page E-23
Precautions: LOTO, Lane Barriers, Slip Hazard
Tools:
•
Ratchet or Impact Driver
•
½” Socket
•
Diagonal Cutters
•
Channel Locks
Location: Operator Access Area (behind machine), Pit
Est. Time: 5 min
Note:
•
Replace all removed cable ties before returning machine to service.
Procedure:
1. Implement LOTO and deploy lane barriers.
2. Remove pit rear guard.
3. Use channel locks to pull end of rivet. Cut rivet underneath barb.
4. Remove pieces of rivet and install a new rivet.
5. Use channel locks to pull barb of rivet through cushion plank.
6. Cut off tail of rivet about 2” [50mm] past barb.
7. Reinstall pit rear guard and double division guard.
8. Remove LOTO and lane barriers. Return machine to service.
Replace Pit Curtain
Precautions: LOTO, Lane Barriers, Slip Hazard
Tools:
•
Ratchet or Impact Driver
•
7
/
16
” Socket
•
7
/
16
” Wrench
Location: Operator Access Area (behind machine), Pit
Est. Time: 15 min
Procedure:
1. Implement LOTO and deploy lane barriers.
2. Open pit hinged top cover.
3. Loosen and remove nuts and bolts holding pit curtain and clamp bar to support.
4. Remove pit curtain and clamp bar.
5. Follow above steps in reverse order to install pit curtain and clamp bar.
6. When installing pit curtain, smooth side faces toward lane, and textured side faces toward
cushion.
7. Remove LOTO and lane barriers. Return machine to service.