QubicaAMF Edge String, Owner'S Manual

Page: 205 / 210

Owner’s Manual
400-051-202-01 Rev. B
Page E-25
5. Using a utility knife, remove vinyl tubing from ball rail.
6. Follow procedure outlined in document 400-051-223 to install new ramp rail tubing.
7. Remove LOTO and lane barriers. Return machine to service.
Precautions: LOTO, Lane Barriers, Slip Hazard, Trip Hazard
Tools:
•
Ratchet or Impact Driver
•
3
/
8
” and ½” Sockets
•
#2 Phillips Screwdriver
•
General Purpose Bearing Grease (NLGI 1) and Brush
•
Shop Towel or Paper Towel
Location: Pindeck, Front of Machine
Est. Time: 30 min
Procedure:
1. Implement LOTO and deploy lane barriers.
2. Remove ground screws (2) and mounting bolts (4) for pinspotter front panel.
3. Remove pinspotter front panel and set aside.
4. Remove sprocket guards (2) on front end of pinspotter.
a. Sprocket guard mounting screws are removed from outside of pinspotter.
5. Use brush to apply grease to both drawbar chains. Remove any excess grease.
6. Reposition drawbar as needed to access and grease entire chain.
7. Reinstall sprocket guards and end panel.
8. Remove LOTO and lane barriers. Return machine to service.
Precautions: LOTO, Lane Barriers, Slip Hazard
Tools:
•
Ratchet or Impact Driver
•
½” Socket
•
General Purpose Bearing Grease (NLGI 1) and Brush
•
Shop Towel or Paper Towel
Location: Pit
Est. Time: 30 min
Procedure:
1. Implement LOTO and deploy lane barriers.
2. Remove chain lift gearmotor (see Page E-19).
3. Remove side panel of chain lift guarding.
4. Use brush to apply grease to chain links and lifter hinges. Remove any excess grease.
5. Move chain manually to lubricate entire chain and both lifter hinges.