QubicaAMF Edge String, Owner'S Manual

Page: 204 / 210

Owner’s Manual
400-051-202-01 Rev. B
Page E-24
Precautions: LOTO, Lane Barriers, Slip Hazard
Tools:
•
Ratchet or Impact Driver
•
Flat Pry Bar(s)
•
½” Socket
Location: Operator Access Area (behind machine), Pit
Est. Time: 20 min
Note:
•
The estimated time assumes an impact driver is used.
Procedure:
1. Implement LOTO and deploy lane barriers.
2. Remove pit rear guards (both pits) and double division guard.
3. Remove cushion assembly (see Page E-21).
4. Remove Pit Floor assembly by using lifting the assembly from the metal pit joists. The
flat pry bars may need to be used for additional leverage.
5. Check condition of sheet metal joists while pit floor is out. C heck and tighten hardware.
Inspect Velcro attachment to joists.
6. Follow above steps in reverse order to install pit floor.
7. Remove LOTO and lane barriers. Return machine to service.
Precautions: LOTO, Lane Barriers
Tools:
•
Silicone Lubricant
•
Chamois Swab
•
1.5” PVC Spacer
•
Utility Knife
•
Degreaser/Shop Towels
•
Ratchet or Impact Driver
•
½” Socket
•
½” Wrench
Location: Operator Access Area (behind machine)
Est. Time: 20 min
Procedure:
1. Implement LOTO and deploy lane barriers.
2. Remove pit rear guards (both pits) and double division guard.
3. Loosen and remove nut and bolt holding ball rail to support bracket.
4. Pull ball rail off chain lift rest rail.