QubicaAMF Edge String, Owner'S Manual

Page: 40 / 210

Owner’s Manual
400-051-202-01 Rev. B Page 2-8
Figure 2-20, Kickback Nose Block Figure 2-21, Machine Support
2.2.20. Machine Support
Sheet metal weldment that supports pinspotter and upper/lower table assemblies on
top of kickbacks. See Figure 2-21.
2.2.21. Chain Lift
Assembly consisting of sheet metal frame, ball stop rails, gearmotor, sprocket/shaft
assemblies, chain drive, and two ball lifter assemblies. Lifts balls from double
division rails to cross sweep for returning balls to bowlers. See Figure 2-22.
Figure 2-22, Chain Lift Figure 2-23, Ball Lifter Assembly
2.2.22. Ball Lifter Assembly
Chain lift assembly consisting of bent hoop, mounting bracket, shaft, and stabilizer
posts. Mounts to chain lift chain loop for lifting balls. Two per chain lift. See Figure
2-23.
2.2.23. Double Division Rail Assembly
Assembly consisting of two ball rails, rail covers, mounting brackets, and ball stop
plate. Guides balls from ball door to chain lift. Ball stop plate prevents balls from
rolling backwards, away from chain lift. See Figure 2-24.