QubicaAMF Edge String, Owner'S Manual

Page: 183 / 210

Owner’s Manual
400-051-202-01 Rev. B
Page E-3
This section contains information and instructions about non-routine maintenance
interventions for the EDGE string.
Applicable Warnings
Tools
In addition to safety tools described in Section 1 (Safety), other tools may be required for
specific tasks. See each intervention for list of tools needed.
WARNING:
•
High voltage is present inside the system controller. Use caution when
operating or handling this equipment. Implement lockout/tagout (LOTO)
before servicing any electrical components (see Appendix A). The main
circuit breaker must always be OPEN, or the power plug
DISCONNECTED, prior to performing any service/repair to electrical
systems.
•
The system controller contains no user-serviceable parts.
•
The system controller includes a tamper indicator. Opening the system
controller enclosure will void the warranty.
•
LOCKOUT/TAGOUT PROCEDURE MUST BE PERFORMED whenever an
operator crosses machine boundary to perform maintenance. Ensure that all power is off
and machine cannot re-energize. Lockout/Tagout operation protects against potential
entanglement and potential electrical hazard. See Appendix A.
•
Thrown balls and scattering pins can cause injury if bowling play is allowed during an
operator intervention. Operator is responsible to perform all required safety procedures.
Deploy lane barriers to protect against thrown balls during maintenance (see Page 1-7).
•
Level 2 interventions may only be performed by qualified personnel. Owner/facility
manager must verify that operators are trained to work safely and perform required safety
tasks.