QubicaAMF Edge String, Owner'S Manual

Page: 186 / 210

Owner’s Manual
400-051-202-01 Rev. B
Page E-6
Precautions: LOTO, Lane Barriers
Tools:
•
Ratchet or Impact Driver
•
½” Socket
Location: Operator Access Area (behind machine)
Est. Time: 5 min
Procedure:
1. Before implementing LOTO, press FULL SET .
2. Implement LOTO and deploy lane barriers.
3. Open reel arm cover and locate brake/encoder unit number on C-channel.
4. Disconnect brake/encoder electrical cable (see Figure E-3).
5.
Using a ratchet or impact driver with a ½” socket, remove flange nuts (2) holding
brake/encoder unit to C-channel. While removing second nut, hold brake/encoder unit to
prevent unit from falling.
6. Holding brake/encoder unit, remove string from all string retainers (see Figures E-2, E-
3).
7. Follow above steps in reverse order to install brake/encoder unit.
8. After installation, remove LOTO and press PINS UP . Wait for machine to lift pins, then
press FULL SET to confirm pin brake is operating correctly.
9. Remove lane barriers and return machine to service.
Figure E-2, Brake/Encoder String Retainers
Figure E-3, Brake/Encoder String Retainer & Electrical Cable
String Retainers
String Retainer
Electrical Cable