![background image](http://html.mh-extra.com/html/quantum/superloader-3a-series/superloader-3a-series_user-manual_770658054.webp)
Chapter 3 On-board Remote Management
Configurations Page
Quantum SuperLoader 3A Series User’s Guide
40
To
Set Network Configuration
:
1
To change the values of the subnet mask, gateway, Simple Network
Management Protocol (SNMP) server, or the time server, type in the
new address, using the
<Tab>
key to move from box to box.
2
Click
submit
.
Setting Security Options
3
When you enable the security option, users must enter a password to
access the autoloader's front panel functionality. A password allows
either administrator-level access or operator-level access (see
Setting
Security
on page 14).
To set
Security
:
1
From any page, click the
Configuration
heading.
The
Configuration
screen displays.
2
On the left-hand side of the screen, click
Security
. The
System
Security
section of the screen displays.
3
To enable front panel security, select the check box next to
Front Panel
Security Enabled
.
4
If the check box is blank, the security option for the front LCD panel
is not enabled.
5
Click
submit
.
To
Reset Front Panel Password
:
1
From any page, click the
Configuration
heading.
The
Configuration
screen displays.
2
On the left-hand side of the screen, click
Security
.
3
Select the check box next to
Reset Front Panel Password
. A check
mark appears.
4
Click
submit
.
To set
User Administration
:
1
From any page, click the
Configuration
heading. The
Configuration
screen displays.
2
On the left-hand side of the screen, click
Security
.
3
From the drop-down list next to
Select User Type
, select
Operator 1
,
Operator 2
,
Administrator 1
or
Administrator 2
.