Chapter 2 Operating the Autoloader
Configuring the Autoloader
Quantum SuperLoader 3A Series User’s Guide
13
3
From the
Ethernet
submenu, scroll to
Set Time Server
, and then press
Enter
. The cursor automatically displays at the first digit.
4
At each position of the time server address, use the up and down
arrows to change the value of each digit. Press
Enter
to advance the
cursor to the next digit.
When you have advanced through all of the digits of the time server
address, the autoloader displays
Enter to save
.
5
Press
Enter
.
New Time Server xxx.xxx.xxx.xxx
displays on the LCD.
You do not need to reboot the autoloader.
6
Press
Escape
or
Enter
to return to the
Ethernet
submenu.
To set the time zone:
1
From the main menu, scroll to
Configuration
, and then press
Enter
.
2
From the
Configuration
menu, scroll to
Time
, and then press
Enter
.
3
From the
Time
submenu, scroll to
Set Timezone
, and then press
Enter
.
The
Time Zone
screen displays, allowing you to set the hours. The
cursor automatically displays at the first digit.
4
Scroll to set the number of hours difference between your local time
and Greenwich Mean Time (GMT).
5
Scroll to set the number of minutes difference between your local
time and GMT, then press
Enter
. The new time zone is set.
6
Press
Escape
or
Enter
as necessary to return to the main menu.
To set the date and time:
1
From the main menu, scroll to
Configuration
, and then press
Enter
.
2
From the
Configuration
menu, scroll to
Time
, and then press
Enter
.
3
From the
Time
submenu, scroll to
Set Date/Time
, and then press
Enter
.
The
Date/Time
screen displays, allowing you to set the date and time.
The cursor automatically displays at the first digit.
4
The first four digits represent the current year. At each position of the
year, use the up and down arrows to change the value of each digit.
Press
Enter
to advance the cursor to the next digit.
Note:
If you make a mistake, press
Escape
to backspace to the
digit you want to change.