![background image](http://html.mh-extra.com/html/quantum/superloader-3a-series/superloader-3a-series_user-manual_770658021.webp)
Chapter 2 Operating the Autoloader
Configuring the Autoloader
Quantum SuperLoader 3A Series User’s Guide
7
security is the operator level and the higher-level security is the
administrator level. There is one password for each level.
The administrator password allows access to all the functionality
available. The operator password allows access to all the functionality in
the
Commands
and
Status
submenus.
Entering Passwords
2
Many functions on the autoloader may be password-protected to ensure
data integrity. To access the menu items necessary to execute these
functions, you must first enter your password (see
Setting Passwords
on
page 15). All passwords are six numeric digits long.
When you enter a password, all password-protected functionality is
available until you close your browser session. If you do not use the front
panel for a period of time, the main screen reappears on the LCD. When
the main screen reappears, the autoloader has automatically logged you
out. You will have to re-enter your password again to access the menu
functionality.
Logging Out
2
To log out of the autoloader, use the following procedure.
1
From the main menu, scroll to
Commands
, and then press
Enter
.
2
From the
Commands
submenu, scroll to
Log Out
, and then press
Enter
.
Session Complete
displays on the LCD.
Configuring the Autoloader
To configure the autoloader, start with the main menu on the front panel.
If the main menu is not already visible on the LCD, press
Enter
.
When you first power on the autoloader, the default is set with no
password protection. However, after you set the security option, all the
configuration functionality is password protected. You need an
administrator-level password to configure the autoloader.
Note:
You can also press
Escape
to log out. Continue pressing
Escape
as required until the main screen displays.