Chapter 2 Operating the Autoloader
Configuring the Autoloader
Quantum SuperLoader 3A Series User’s Guide
15
3
To change the option, press
Enter
. For example, if the security option
was set to
On
, it is now set to
Off
, and no check mark displays.
Setting Passwords
2
Many operations on the autoloader are password-protected to ensure
data integrity. You can set passwords to administrator level and to
operator level. Operator-level users have access to the
Commands
and
Status
menus. Administrator-level users have access to all functionality.
To set a password:
1
From the main menu, scroll to
Configuration
, and then press
Enter
.
2
From the
Configuration
menu, scroll to
Set Password
, and then press
Enter
.
3
To set a password to the operator level, scroll to
Operator
. To set a
password to the administrator level, scroll to
Administrator
, then
press
Enter
. The
Set Password
screen displays.
4
Press
Enter
. If you are not logged in as
Administrator
, press
Enter
again to log in. A text box displays above the first asterisk.
In the text box, scroll to the first character of the password. The cursor
automatically appears at the first number of the password.
5
At each position of the password, use the up and down arrows to
change the value of each number. Press
Enter
to advance the cursor to
the next number.
6
Press
Enter
. The text box above the asterisk disappears and another
text box displays above the next asterisk.
7
Repeat steps
5
and
6
to enter the remaining digits of the password.
When you have entered six numbers, the autoloader displays
Submit
Password
below the asterisks.
8
Press
Enter
to submit the password.
Password Successfully changed
appears on the LCD.
9
Press
Enter
. The
Operator
and
Administrator
options reappear. You
can either enter another password, or press
Escape
or
Enter
as
necessary to return to the main menu.
Note:
If you make a mistake, press
Escape
to backspace to the
digit you want to change.
