Chapter 4 Customer Replaceable Units (CRUs)
Replacing a Magazine or Magazine Blank
Quantum SuperLoader 3A Series User’s Guide
51
2
Slide the magazine into the magazine bay. Make sure you position
the magazine correctly; it should slide smoothly.
3
The magazine is correctly installed when you feel it click into place
and the front is flush with the front panel.
Installing a Blank
4
To install a magazine blank:
1
Grasp the magazine blank by the handle with one hand and guide
the blank into the magazine bay.
2
Slide the magazine blank into the magazine bay until it stops.
Changing the Orientation
4
A magazine or magazine blank can be configured to fit in the right or left
magazine bay. The handle must be removed and the appropriate handle
attached to match the orientation of the magazine or blank.
To remove and attach a magazine handle, you will need a #1 Phillips
screwdriver.
Caution:
Insert the magazine slowly to avoid damaging
internal components or the autoloader.
Note:
The magazine blank is correctly installed when you feel it
click into place and the front of the blank is flush with the
front panel of the autoloader.
