![background image](http://html.mh-extra.com/html/quantum/superloader-3a-series/superloader-3a-series_user-manual_770658025.webp)
Chapter 2 Operating the Autoloader
Configuring the Autoloader
Quantum SuperLoader 3A Series User’s Guide
11
When you have advanced through all of the digits of the subnet mask
address, the autoloader displays
Enter to save
.
5
Press
Enter
.
New Subnet Mask xxx.xxx.xxx.xxx
displays on the LCD.
You do not need to reboot the autoloader.
6
Press
Escape
or
Enter
to return to the Ethernet submenu.
Setting the IP Gateway
2
To set an IP gateway address:
1
From the main menu, scroll to
Configuration
, and then press
Enter
.
2
From the
Configuration
menu, scroll to
Ethernet
, and then press
Enter
.
3
From the
Ethernet
submenu, scroll to
Set Gateway
, and then press
Enter
. The cursor automatically displays at the first digit.
4
At each position of the gateway address, use the up and down arrows
to change the value of each digit. Press
Enter
to advance the cursor to
the next digit.
When you have advanced through all of the digits of the gateway
address, the autoloader displays
Enter to save
.
5
Press
Enter
.
New Gateway is xxx.xxx.xxx.xxx
displays on the LCD. You
do not need to reboot the autoloader.
6
Press
Escape
or
Enter
to return to the
Ethernet
submenu.
Setting the SNMP
Server
2
An SNMP server monitors a network by processing reporting activity in
each network device (hub, router, bridge, and so on). The server uses this
information to define what is obtainable from each device and what can
be controlled (turned off, on, and so on).
To set an SNMP server address:
1
From the main menu, scroll to
Configuration
, and then press
Enter
.
Note:
If you make a mistake, press
Escape
to backspace to the
digit you want to change.
Note:
If you make a mistake, press
Escape
to backspace to the
digit you want to change.