![background image](http://html.mh-extra.com/html/quantum/superloader-3a-series/superloader-3a-series_user-manual_770658024.webp)
Chapter 2 Operating the Autoloader
Configuring the Autoloader
Quantum SuperLoader 3A Series User’s Guide
10
5
Press and hold the power button on the front panel until
System
Shutdown wait 60 sec
displays on the LCD.
Power Off
displays on the
LCD, then the autoloader shuts off.
6
Press the power button again to power on the autoloader. The IP
address is changed.
To set a static IP address:
1
From the main menu, scroll to
Configuration
, and then press
Enter
.
2
From the
Configuration
menu, scroll to
Ethernet
, and then press
Enter
.
3
From the
Ethernet
submenu, scroll to
Set IP
, and then press
Enter
.
4
Scroll to
Static IP
, and then press
Enter
. The cursor automatically
displays at the first digit.
5
At each position of the IP address, use the up and down arrows to
change the value of each digit. Press
Enter
to advance the cursor to
the next digit.
When you have advanced through all of the digits of the IP address,
the autoloader displays
Enter to save
.
6
Press
Enter
. The
Configuration
submenu displays and the static IP is
now in effect. You do not need to reboot the autoloader.
7
Press
Escape
or
Enter
to return to the Ethernet submenu.
Setting the Subnet Mask
2
Creating a subnet mask is a method of splitting IP networks into a series
of subgroups, or subnets, to improve performance or security.
To set a subnet mask:
1
From the main menu, scroll to
Configuration
, and then press
Enter
.
2
From the
Configuration
menu, scroll to
Ethernet
, and then press
Enter
.
3
From the
Ethernet
submenu, scroll to
Set Subnet Mask
, and then press
Enter
.
4
At each position of the
Subnet Mask
address, use the up and down
arrows to change the value of each digit. Press
Enter
to advance the
cursor to the next digit.
Note:
If you make a mistake, press
Escape
to backspace to the
digit you want to change.