manualshive.com logo in svg

Quantum Scalar Distributed Library Controller 2.7, Reference Manual, Page: 47 / 324

Share
Download
Quantum Scalar Distributed Library Controller 2.7 Reference Manual Download Page 47

Scalar DLC Reference Guide

29

Restore Database from Backup

Step 1

Launch DB tool, log in and open Restore tab (refer to 

Database Restore

 on page 230).

Step 2

Stop the Scalar DLC software (

bring offline

 for a failover solution).

Step 3

Select 

Database

 to restore from a regular backup, then select a backup from a database 

backup list.

Step 4

To restore the database with transaction logs, check also 

Restore with logs

 box and select the 

transaction log.

Step 5

Press 

Restore

 button to restore the database, them 

Exit

 to close DB tool.

Step 6

Start/bring online Scalar DLC again.

Restore Database from File

Step 1

Launch DB tool, log in and open Restore tab (refer to 

Database Restore

 on page 230).

Step 2

Stop the Scalar DLC software (

bring offline

 for a failover solution).

Step 3

Select 

From device 

to restore from a file, then select a device name (file) to restore the 

database from.

Step 4

Change the names for a database file and transaction log file if the default values are not good 
enough.

Step 5

Press 

Restore

 button to restore the database, them 

Exit

 to close DB tool.

Step 6

Start/bring online Scalar DLC again.

Archive Database

Step 1

Launch DB tool, log in and open Save tab (refer to 

Database Save

 on page 232).

Step 2

Set up the 

Destination

.

Step 3

Press 

Save

 button to save the database archive to a file, them 

Exit

 to close DB tool.

Summary of Contents for Scalar Distributed Library Controller 2.7





































































































































































































































































































































Reviews:

No comments